This is the LEPIN 20008 – Technic RC BullDozer Real Reviews from our lovely customer nickname Ralph Kaiser in Germany.
Yesterday I took the time and assembled the RC Dozer.
Set: 20008 – Technic RC Bulldozer
Quality: good to very good
Defects: 1 wrong part (factory packing error)
Construction was pretty fast, took about 3 hours, although I (before mornings) about 30-40min. The parts had been sorted.
Instructions are good and understandable, in 2-3 places, it was not really clear Recognizable the color of the connectors had (black/blue/gray/yellow/ beige) short look at the “finished” image because there was a certainty.
In addition, a color printed extra page in the manual should prevent an Aufbaufehler from the very beginning. Black instead of a gray rod. The black fits not at all and if you look at the “finished” picture you can clearly see that a shorter gray rod was installed …. is helpful, but would not have been necessary.
Also the size is “pleasant pleasing” Length approx: 50cm, width approx: 25cm, height approx: 19cm
Fits quite well to the wheel loader and shovel…
Is (for me as a Lego RC fan) a really cool part.
Works as it should: forward / backward, right / left, shield and Ripper can also be raised and lowered – but the FB must be changed (only single FB here) so nothing with drive and at the same time raise / lower ripper.
Kraft has the thing a lot, a 40×40 pillow pushes it loosely in the living room on the carpet, pushes a blanket together. The traction is also passable, with a little effort over a “verwurschtelte” ceiling over it.
Should he nevertheless “get tangled up”, one lowers the shield and/or ripper and he raises himself completely about 3cm high
Some parts are leftover, it happens before anyhow better than if some are missing
One problem I had, however, 1 part was wrong from the sign, since all bags were original and closed it is a factory packaging error. Will probably use an “original part”
The part also has the “motor with movable cylinder” because I’ve removed a gear (cylinders are now never moved) and circumvent some “superfluous” mechanics parts, so it funzt mM better.
Let’s see, still have lots of LEDs lying around, maybe I spend the part of a “work lights”